Drab to FAB Dresser

I found this dresser online for $40.00. It had a gazillion coats of paint on it and was in need of some serious prep work, but it had pretty good bones. Plus it was all wood, that is always a bonus.

Here is what a did-

1. I cleaned the dresser really well with a little hot soapy water. 

2. I then removed the knobs and sanded it down. Not straight down to the wood, but  I sanded it enough to give it a smooth feel. 

3.Then I wiped it down again with hot water. (You want to make sure to remove all the fine dust particles.)

4. I spray painted the dresser with this-

 It took 4 coats. More than usual, but with all the paint coats it had from previous owners, I wanted to make sure to get it nice and thick.

5. I lightly sanded the dresser again to get rid of any over spray and to give it a shabby feel.

6. I taped off the top of the dresser so I could make stripes.

7. I spray painted the knobs and top stripes with the shiny metallic finish.

8. I applied a spray clear coat to seal the paint. 

And here is the finished product.

And one more side by side..

Happy Crafting,

Bon